2) TAKE NOTICE OF SD CARD INSIDE PLASTIC WRAP
3) REMOVE THE MEDIA PLAYER DEVICE AND THE SD CARD FROM PLASTIC WRAP
4) INSERT SD CARD INTO SLOT ON MEDIA PLAYER LABELED “SD”
5) REMOVE HDMI CABLE FROM BOX
6) PLUG HDMI CABLE INTO MEDIA PLAYER SLOT LABELED “HD-OUT”
7) REMOVE POWER SUPPLY FROM BOX
8) PLUG POWER SUPPLY INTO SLOT ON MEDIA PLAYER LABELED “POWER ICON”
*NOW WE ARE READY TO CONNECT EVERYTHING TO THE TV*
9) PLUG MEDIA PLAYER POWER CABLE INTO AVAILABLE POWER SLOT BEHIND TV
10) PLUG HDMI CABLE INTO BACK OF TV SLOT LABELED “HDMI1”
11) ENSURE HDMI CABLE IS PLUGGED INTO HDMI1, and not HDMI2, HDMI3, ETC.
12) REMOVE 2 VELCRO STRIPS FROM BOX. EACH STRIP CONSISTS OF 2 PIECES
13) PLACE ONE SIDE OF LONG VELCRO STRIP ON BACK OF MEDIA PLAYER
14) PLACE OTHER SIDE OF LONG VELCRO STRIP ON BACK OF TV
15) SECURE MEDIA PLAYER TO TV BY FIRMLY PRESSING EACH LONG VELCRO STRIP TOGETHER, ENSURING STRONG BOND
16) SET ASIDE SHORT VELCRO STRIP
17) REMOVE REMOTE CONTROL FROM BOX AND DISCARD PLASTIC SLEEVE
18) REMOVE PLASTIC PIECE FROM BATTERY CONNECTOR ON REMOTE BY GENTLY PULLING TAB OUTWARD
19) ATTACH 1 PIECE OF SHORT VELCRO STRIP TO BACK OF REMOTE
20) ATTACH 2nd PIECE OF SHORT VELCRO STRIP TO BACK OF TELEVISION (PLACE STRIP NEAR MEDIA PLAYER FOR EASY ACCESS)
*NOW WE ARE READY TO CHOOSE VIDEO SETTINGS*
21) POINT REMOTE CONTROL AT MEDIA PLAYER AND PRESS “HDMI”
22) PRESS “SETUP”
23) SCROLL TO “Play media path” OPTION AND PRESS ENTER.
24) CHOOSE A VIDEO TO PLAY (A, B, C…) THEN PRESS ENTER
25) AFTER CONFIRMING VIDEO SELECTION, WE NEED TO POWER CYCLE THE MEDIA PLAYER
26) PRESS POWER BUTTON TO TURN OFF MEDIA PLAYER. (IT WILL TAKE A FEW SECONDS TO TURN OFF)
27) PRESS POWER BUTTON AGAIN TO TURN MEDIA PLAYER ON AGAIN (IT WILL TAKE A FEW SECONDS TO TURN BACK ON)
28) FIRMLY CONNECT REMOTE CONTROL VELCRO TO SHORT VELCRO ON BACK OF TV.
29) IF YOU HAVE ANY QUESTIONS, PLEASE CALL SUPPORT # LOCATED ON BACK OF DEVICE
*THATS IT! ENJOY YOUR NEW MEDIA PLAYER!*
Please Click Here to return to the support page.